Getting Started with ALEXAN ATMEL AT89C2051 Programmer
4 posters
Page 1 of 1
Getting Started with ALEXAN ATMEL AT89C2051 Programmer
What You Need To Get Started
1. Personal Computer with CD-ROM and serial or USB port
2. ALEXAN ATMEL Programmer Software
3. ALEXAN ATMEL Programmer Module
4. RS232 Serial Cable Or a USB to COM/Serial cable.
5. 12 to 16Vdc Power Adaptor
6. AT89C2051 or AT89C4051 ATMEL Microcontroller (or MCU)
7. Any debugger/compiler software where you can write your source code
and compile it to a hex file format
8. A Hex file
Alexan Atmel Programmer Module
Alexan Atmel Programmer Computer-Interface Software
Last edited by Admin on Fri Sep 15, 2017 11:57 am; edited 1 time in total
Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer
what ideal debugger/compiler software that converts and compile a source code to a hex file format?
camille- Newbie
- Posts : 2
Join date : 2017-09-14
Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer
What if you forgot to lower down the lever and you do the programming, will your ic can still work?
ndreanicoke- Newbie
- Posts : 2
Join date : 2017-09-15
Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer
I was searchingd about that too, last night, and I found ",Keil" itmakes C compilers, macro assemblers, real-time kernels, debuggers, simulators, integents, evaluation boards, and emulators for the ARM, but still I a searching for othr ways hahhaa.share-camille wrote:what ideal debugger/compiler software that converts and compile a source code to a hex file format?
herbuela- Member
- Posts : 3
Join date : 2017-09-25
Re: Getting Started with ALEXAN ATMEL AT89C2051 Programmer
how can I convert P1.0 in hex code?
herbuela- Member
- Posts : 3
Join date : 2017-09-25
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|